When I get to the login screen after booting up my PC, I enter my password and press enter and the screen freezes, why? Please let me know if you know how to fix it…
This is not enough information to guess as to what the issue could be. Can you provide any logs? (For example by changing to a different virtual terminal or ssh’ing in to get a dmesg
)
[ 0.994937] hub 2-0:1.0: USB hub found
[ 0.995002] hub 2-0:1.0: 9 ports detected
[ 0.995388] usbcore: registered new interface driver usbserial_generic
[ 0.995390] usbserial: USB Serial support registered for generic
[ 1.011448] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.022310] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.022312] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.022487] mousedev: PS/2 mouse device common for all mice
[ 1.022780] rtc_cmos rtc_cmos: RTC can wake from S4
[ 1.023568] rtc_cmos rtc_cmos: registered as rtc0
[ 1.023575] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.023580] intel_pstate: Intel P-state driver initializing
[ 1.024816] intel_pstate: HWP enabled
[ 1.024943] EFI Variables Facility v0.08 2004-May-17
[ 1.173241] hid: raw HID events driver (C) Jiri Kosina
[ 1.173261] usbcore: registered new interface driver usbhid
[ 1.173262] usbhid: USB HID core driver
[ 1.173292] drop_monitor: Initializing network drop monitor service
[ 1.173327] Initializing XFRM netlink socket
[ 1.173376] NET: Registered protocol family 10
[ 1.173498] Segment Routing with IPv6
[ 1.173506] NET: Registered protocol family 17
[ 1.173520] mpls_gso: MPLS GSO support
[ 1.186923] microcode: sig=0x90675, pf=0x1, revision=0x23
[ 1.186962] microcode: Microcode Update Driver: v2.2.
[ 1.186966] AVX2 version of gcm_enc/dec engaged.
[ 1.186966] AES CTR mode by8 optimization enabled
[ 1.228538] sched_clock: Marking stable (1228525924, 0)->(1328972170, -100446246)
[ 1.228669] registered taskstats version 1
[ 1.228674] Loading compiled-in X.509 certificates
[ 1.244369] Loaded X.509 cert ‘Rocky kernel signing key: 288b6d785ae4ebfb9875f758558b01f5f2b5c7f8’
[ 1.244378] Loaded X.509 cert ‘Rocky Enterprise Software Foundation: Rocky Linux Driver Update Signing Cert: b3c94fccbae32745b11dcd9a9a3926acfcef2540’
[ 1.244383] Loaded X.509 cert ‘Rocky Enterprise Software Foundation: Rocky Linux kpatch Signing Cert: 7392f78c54ed85dfb1391b46b23a14dd29fc7514’
[ 1.244402] zswap: loaded using pool lzo/zbud
[ 1.244498] page_owner is disabled
[ 1.247618] Key type big_key registered
[ 1.249094] Key type trusted registered
[ 1.250552] Key type encrypted registered
[ 1.251530] integrity: Loading X.509 certificate: UEFI:db
[ 1.251537] integrity: Loaded X.509 cert ‘HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7’
[ 1.251538] integrity: Loading X.509 certificate: UEFI:db
[ 1.251542] integrity: Loaded X.509 cert ‘Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53’
[ 1.251543] integrity: Loading X.509 certificate: UEFI:db
[ 1.251548] integrity: Loaded X.509 cert ‘Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4’
[ 1.253503] integrity: Loading X.509 certificate: UEFI:MokListRT
[ 1.253589] integrity: Loaded X.509 cert ‘Rocky Enterprise Software Foundation: Rocky Linux Secure Boot Root CA: 4c2c6bd7d64ee81581cab8e986661f65e2166fc4’
[ 1.253592] ima: Allocated hash algorithm: sha256
[ 1.283839] ima: No architecture policies found
[ 1.283843] evm: Initialising EVM extended attributes:
[ 1.283843] evm: security.selinux
[ 1.283844] evm: security.ima
[ 1.283844] evm: security.capability
[ 1.283844] evm: HMAC attrs: 0x1
[ 1.284617] rtc_cmos rtc_cmos: setting system clock to 2024-05-10 15:57:35 UTC (1715356655)
[ 1.288840] Freeing unused decrypted memory: 2036K
[ 1.289128] Freeing unused kernel memory: 2492K
[ 1.296012] Write protecting the kernel read-only data: 22528k
[ 1.296503] Freeing unused kernel memory: 2012K
[ 1.296584] Freeing unused kernel memory: 320K
[ 1.327057] usb 1-9: new low-speed USB device number 2 using xhci_hcd
[ 1.415218] systemd[1]: systemd 239 (239-51.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
[ 1.427134] systemd[1]: Detected architecture x86-64.
[ 1.427135] systemd[1]: Running in initial RAM disk.
[ 1.432869] systemd[1]: Set hostname to <localhost.localdomain>.
[ 1.452216] systemd[1]: Listening on udev Control Socket.
[ 1.452233] systemd[1]: Reached target Timers.
[ 1.452239] systemd[1]: Reached target Swap.
[ 1.452242] systemd[1]: Reached target Slices.
[ 1.452262] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.452275] systemd[1]: Listening on udev Kernel Socket.
[ 1.459775] fuse: init (API version 7.33)
[ 1.462650] usb 1-9: New USB device found, idVendor=046d, idProduct=c34b, bcdDevice=62.10
[ 1.462651] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.462652] usb 1-9: Product: USB Keyboard
[ 1.462652] usb 1-9: Manufacturer: Logitech
[ 1.470351] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C34B.0001/input/input5
[ 1.519836] device-mapper: uevent: version 1.0.3
[ 1.519871] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
[ 1.522093] hid-generic 0003:046D:C34B.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-9/input0
[ 1.524983] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C34B.0002/input/input6
[ 1.577041] hid-generic 0003:046D:C34B.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-9/input1
[ 1.578980] nvme 0000:01:00.0: platform quirk: setting simple suspend
[ 1.579023] nvme nvme0: pci function 0000:01:00.0
[ 1.590938] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.590938] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.591189] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.591591] libata version 3.00 loaded.
[ 1.593582] nvme nvme0: Shutdown timeout set to 8 seconds
[ 1.594531] ahci 0000:00:17.0: version 3.0
[ 1.599681] nvme nvme0: allocated 64 MiB host memory buffer.
[ 1.604863] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf0 impl SATA mode
[ 1.604864] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds
[ 1.613307] scsi host0: ahci
[ 1.613366] scsi host1: ahci
[ 1.613417] scsi host2: ahci
[ 1.613485] scsi host3: ahci
[ 1.613539] scsi host4: ahci
[ 1.613580] scsi host5: ahci
[ 1.613621] scsi host6: ahci
[ 1.613664] scsi host7: ahci
[ 1.613681] ata1: DUMMY
[ 1.613681] ata2: DUMMY
[ 1.613682] ata3: DUMMY
[ 1.613682] ata4: DUMMY
[ 1.613688] ata5: SATA max UDMA/133 abar m2048@0x80923000 port 0x80923300 irq 126
[ 1.613689] ata6: SATA max UDMA/133 abar m2048@0x80923000 port 0x80923380 irq 126
[ 1.613691] ata7: SATA max UDMA/133 abar m2048@0x80923000 port 0x80923400 irq 126
[ 1.613692] ata8: SATA max UDMA/133 abar m2048@0x80923000 port 0x80923480 irq 126
[ 1.658215] nvme nvme0: 12/0/0 default/read/poll queues
[ 1.662270] nvme0n1: detected capacity change from 0 to 256060514304
[ 1.664471] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.664541] nvme0n1: p1 p2 p3
[ 1.685320] i915: unknown parameter ‘alpha_support’ ignored
[ 1.685540] i915 0000:00:02.0: Your graphics device 4690 is not properly supported by the driver in this
kernel version. To force driver probe anyway, use i915.force_probe=4690
module parameter or CONFIG_DRM_I915_FORCE_PROBE=4690 configuration option,
or (recommended) check for kernel updates.
[ 1.691039] usb 1-10: new low-speed USB device number 3 using xhci_hcd
[ 1.727404] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 5c:60:ba:3f:ec:c4
[ 1.727405] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.727517] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
[ 1.728023] e1000e 0000:00:1f.6 eno1: renamed from eth0
[ 1.821585] usb 1-10: New USB device found, idVendor=0461, idProduct=4141, bcdDevice= 1.00
[ 1.821589] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.821591] usb 1-10: Product: HP 320M USB Optical Mouse
[ 1.821593] usb 1-10: Manufacturer: PixArt
[ 1.824675] input: PixArt HP 320M USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0461:4141.0003/input/input7
[ 1.824910] hid-generic 0003:0461:4141.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP 320M USB Optical Mouse] on usb-0000:00:14.0-10/input0
[ 1.927604] ata8: SATA link down (SStatus 4 SControl 300)
[ 1.927821] ata7: SATA link down (SStatus 4 SControl 300)
[ 1.927840] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.927946] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.928978] ata5.00: ATA-10: WDC WD10EZEX-60WN4A2, 04.01A04, max UDMA/100
[ 1.928979] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.929948] ata5.00: configured for UDMA/100
[ 1.930112] scsi 4:0:0:0: Direct-Access ATA WDC WD10EZEX-60W 1A04 PQ: 0 ANSI: 5
[ 1.935153] ata6.00: ATAPI: hp PLDS DVDRW DU8AESH, 6HSM, max UDMA/133
[ 1.945858] ata6.00: configured for UDMA/133
[ 1.958457] scsi 5:0:0:0: CD-ROM hp PLDS DVDRW DU8AESH 6HSM PQ: 0 ANSI: 5
[ 1.982679] scsi 4:0:0:0: Attached scsi generic sg0 type 0
[ 1.982690] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[ 1.985157] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.985158] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 1.985160] sd 4:0:0:0: [sda] Write Protect is off
[ 1.985161] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.985165] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.019942] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.019946] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.041972] sda: sda1
[ 2.042154] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.048222] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.372077] PM: Image not found (code -22)
[ 2.479713] SGI XFS with ACLs, security attributes, quota, no debug enabled
[ 2.480821] XFS (dm-0): Mounting V5 Filesystem
[ 2.493213] XFS (dm-0): Ending clean mount
[ 2.606093] printk: systemd: 16 output lines suppressed due to ratelimiting
[ 2.641191] audit: type=1404 audit(1715356656.856:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1
[ 2.696112] SELinux: policy capability network_peer_controls=1
[ 2.696113] SELinux: policy capability open_perms=1
[ 2.696113] SELinux: policy capability extended_socket_class=1
[ 2.696113] SELinux: policy capability always_check_network=0
[ 2.696114] SELinux: policy capability cgroup_seclabel=1
[ 2.696114] SELinux: policy capability nnp_nosuid_transition=1
[ 2.709399] audit: type=1403 audit(1715356656.924:3): auid=4294967295 ses=4294967295 lsm=selinux res=1
[ 2.710115] systemd[1]: Successfully loaded SELinux policy in 69.119ms.
[ 2.715006] systemd[1]: RTC configured in localtime, applying delta of 540 minutes to system time.
[ 2.724713] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 8.295ms.
[ 2.726139] systemd[1]: systemd 239 (239-51.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)
[ 2.738082] systemd[1]: Detected architecture x86-64.
[ 2.738695] systemd[1]: Set hostname to <localhost.localdomain>.
[ 2.842408] systemd[1]: systemd-journald.service: Succeeded.
[ 2.842755] systemd[1]: initrd-switch-root.service: Succeeded.
[ 2.842936] systemd[1]: Stopped Switch Root.
[ 2.843100] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.
[ 2.843128] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[ 2.843152] systemd[1]: Stopped Journal Service.
[ 2.843484] systemd[1]: Starting Journal Service…
[ 2.866031] Adding 8105980k swap on /dev/mapper/rl-swap. Priority:-2 extents:1 across:8105980k SSFS
[ 4.012749] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 4.012777] acpi PNP0C14:02: duplicate WMI GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 (first instance was on PNP0C14:00)
[ 4.012777] acpi PNP0C14:02: duplicate WMI GUID 41227C2D-80E1-423F-8B8E-87E32755A0EB (first instance was on PNP0C14:00)
[ 4.012778] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 4.130047] intel-lpss 0000:00:1e.0: enabling device (0000 → 0002)
[ 4.140542] i801_smbus 0000:00:1f.4: enabling device (0000 → 0003)
[ 4.140726] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[ 4.140764] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[ 4.140857] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 4.141010] dw-apb-uart.0: ttyS2 at MMIO 0x4017000000 (irq = 16, base_baud = 6250000) is a 16550A
[ 4.153200] intel-lpss 0000:00:1e.3: enabling device (0000 → 0002)
[ 4.153440] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 4.212877] snd_hda_intel 0000:00:1f.3: enabling device (0000 → 0002)
[ 5.061086] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.086899] perf uncore: Cannot find matched IMC device.
[ 5.086903] perf uncore: Cannot find matched IMC device.
[ 5.096278] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 5.096278] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 5.096278] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 5.096279] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 5.096279] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 5.441385] iTCO_vendor_support: vendor-support=0
[ 5.442500] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.442581] iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[ 5.442681] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.446570] hp_wmi: query 0x4 returned error 0x5
[ 5.448845] hp_wmi: query 0x4 returned error 0x5
[ 5.451004] hp_wmi: query 0xd returned error 0x5
[ 5.451030] input: HP WMI hotkeys as /devices/virtual/input/input9
[ 5.453065] intel_rapl_common: Found RAPL domain package
[ 5.453066] intel_rapl_common: Found RAPL domain core
[ 5.453067] intel_rapl_common: Found RAPL domain uncore
[ 5.453068] intel_rapl_common: Found RAPL domain psys
[ 5.461141] pxa2xx-spi pxa2xx-spi.1: missing platform data
[ 6.001399] XFS (dm-2): Mounting V5 Filesystem
[ 6.001436] XFS (nvme0n1p2): Mounting V5 Filesystem
[ 6.025921] XFS (dm-2): Ending clean mount
[ 6.026950] XFS (nvme0n1p2): Ending clean mount
[ 6.096808] RPC: Registered named UNIX socket transport module.
[ 6.096808] RPC: Registered udp transport module.
[ 6.096808] RPC: Registered tcp transport module.
[ 6.096809] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.307284] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 6.488529] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 6.491117] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 6.492479] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 10.264847] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 10.264915] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 10.383138] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 10.386370] tun: Universal TUN/TAP device driver, 1.6
[ 10.386919] virbr0: port 1(virbr0-nic) entered blocking state
[ 10.386920] virbr0: port 1(virbr0-nic) entered disabled state
[ 10.386942] device virbr0-nic entered promiscuous mode
[ 10.564339] virbr0: port 1(virbr0-nic) entered blocking state
[ 10.564341] virbr0: port 1(virbr0-nic) entered listening state
[ 10.583117] virbr0: port 1(virbr0-nic) entered disabled state
[ 19.445451] rfkill: input handler disabled
[ 66.528092] snd_hda_intel 0000:00:1f.3: couldn’t bind with audio component
[ 66.547054] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 66.547055] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 66.547056] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 66.547056] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 66.547056] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 66.547057] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 66.587398] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 66.587452] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 66.587484] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
This is the dmesg you requested. Please confirm.
I don’t see any indications of a problem there. Maybe try checking the systemd journal? I’d also try to see if there’s a difference between attempting to start a wayland session or an x11 session.
In your next post:
Do not just post an entire log. Look for snippets you think are relevant. Attempt some troubleshooting steps on your own, and list what you’ve tried / what you’ve searched for. If you want people to help you, you have to show that you’re putting some effort into trying to solve it yourself, too.
Okay, I’ll try to analyze the issue you’re experiencing, and I’ll be sure to post when I’m stuck or have questions. Thank you.
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.