# Rocky linux login freezing

**URL:** <https://forums.rockylinux.org/t/rocky-linux-login-freezing/13982>\
**Category:** Rocky Linux Help & Support\
**Tags:** rocky-linux-8\
**Created:** [May 10, 2024, 5:21am UTC](https://forums.rockylinux.org/t/rocky-linux-login-freezing/13982 "2024-05-10T05:21:56Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![beakgwangsun](https://avatars.discourse-cdn.com/v4/letter/b/f19dbf/32.png) [@beakgwangsun](https://forums.rockylinux.org/u/beakgwangsun)\
**Post date:** [May 10, 2024, 5:21am UTC](https://forums.rockylinux.org/t/rocky-linux-login-freezing/13982/1 "2024-05-10T05:21:56Z")

</div>

When I get to the login screen after booting up my PC, I enter my password and press enter and the screen freezes, why? Please let me know if you know how to fix it…

---

<div class="post-metadata">

**Author:** ![brian](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.rockylinux.org/brian/32/5777_2.png) [@brian](https://forums.rockylinux.org/u/brian)\
**Post date:** [May 10, 2024, 5:48am UTC](https://forums.rockylinux.org/t/rocky-linux-login-freezing/13982/2 "2024-05-10T05:48:23Z")

</div>

This is not enough information to guess as to what the issue could be. Can you provide any logs? (For example by changing to a different virtual terminal or ssh’ing in to get a `dmesg`)

---

<div class="post-metadata">

**Author:** ![beakgwangsun](https://avatars.discourse-cdn.com/v4/letter/b/f19dbf/32.png) [@beakgwangsun](https://forums.rockylinux.org/u/beakgwangsun)\
**Post date:** [May 10, 2024, 7:01am UTC](https://forums.rockylinux.org/t/rocky-linux-login-freezing/13982/3 "2024-05-10T07:01:14Z")

</div>

[0.994937] hub 2-0:1.0: USB hub found  
[0.995002] hub 2-0:1.0: 9 ports detected  
[0.995388] usbcore: registered new interface driver usbserial\_generic  
[0.995390] usbserial: USB Serial support registered for generic  
[1.011448] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12  
[1.022310] serio: i8042 KBD port at 0x60,0x64 irq 1  
[1.022312] serio: i8042 AUX port at 0x60,0x64 irq 12  
[1.022487] mousedev: PS/2 mouse device common for all mice  
[1.022780] rtc\_cmos rtc\_cmos: RTC can wake from S4  
[1.023568] rtc\_cmos rtc\_cmos: registered as rtc0  
[1.023575] rtc\_cmos rtc\_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs  
[1.023580] intel\_pstate: Intel P-state driver initializing  
[1.024816] intel\_pstate: HWP enabled  
[1.024943] EFI Variables Facility v0.08 2004-May-17  
[1.173241] hid: raw HID events driver (C) Jiri Kosina  
[1.173261] usbcore: registered new interface driver usbhid  
[1.173262] usbhid: USB HID core driver  
[1.173292] drop\_monitor: Initializing network drop monitor service  
[1.173327] Initializing XFRM netlink socket  
[1.173376] NET: Registered protocol family 10  
[1.173498] Segment Routing with IPv6  
[1.173506] NET: Registered protocol family 17  
[1.173520] mpls\_gso: MPLS GSO support  
[1.186923] microcode: sig=0x90675, pf=0x1, revision=0x23  
[1.186962] microcode: Microcode Update Driver: v2.2.  
[1.186966] AVX2 version of gcm\_enc/dec engaged.  
[1.186966] AES CTR mode by8 optimization enabled  
[1.228538] sched\_clock: Marking stable (1228525924, 0)-\>(1328972170, -100446246)  
[1.228669] registered taskstats version 1  
[1.228674] Loading compiled-in X.509 certificates  
[1.244369] Loaded X.509 cert ‘Rocky kernel signing key: 288b6d785ae4ebfb9875f758558b01f5f2b5c7f8’  
[1.244378] Loaded X.509 cert ‘Rocky Enterprise Software Foundation: Rocky Linux Driver Update Signing Cert: b3c94fccbae32745b11dcd9a9a3926acfcef2540’  
[1.244383] Loaded X.509 cert ‘Rocky Enterprise Software Foundation: Rocky Linux kpatch Signing Cert: 7392f78c54ed85dfb1391b46b23a14dd29fc7514’  
[1.244402] zswap: loaded using pool lzo/zbud  
[1.244498] page\_owner is disabled  
[1.247618] Key type big\_key registered  
[1.249094] Key type trusted registered  
[1.250552] Key type encrypted registered  
[1.251530] integrity: Loading X.509 certificate: UEFI:db  
[1.251537] integrity: Loaded X.509 cert ‘HP Inc.: HP UEFI Secure Boot DB 2017: d9c01b50cfcae89d3b05345c163aa76e5dd589e7’  
[1.251538] integrity: Loading X.509 certificate: UEFI:db  
[1.251542] integrity: Loaded X.509 cert ‘Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53’  
[1.251543] integrity: Loading X.509 certificate: UEFI:db  
[1.251548] integrity: Loaded X.509 cert ‘Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4’  
[1.253503] integrity: Loading X.509 certificate: UEFI:MokListRT  
[1.253589] integrity: Loaded X.509 cert ‘Rocky Enterprise Software Foundation: Rocky Linux Secure Boot Root CA: 4c2c6bd7d64ee81581cab8e986661f65e2166fc4’  
[1.253592] ima: Allocated hash algorithm: sha256  
[1.283839] ima: No architecture policies found  
[1.283843] evm: Initialising EVM extended attributes:  
[1.283843] evm: security.selinux  
[1.283844] evm: security.ima  
[1.283844] evm: security.capability  
[1.283844] evm: HMAC attrs: 0x1  
[1.284617] rtc\_cmos rtc\_cmos: setting system clock to 2024-05-10 15:57:35 UTC (1715356655)  
[1.288840] Freeing unused decrypted memory: 2036K  
[1.289128] Freeing unused kernel memory: 2492K  
[1.296012] Write protecting the kernel read-only data: 22528k  
[1.296503] Freeing unused kernel memory: 2012K  
[1.296584] Freeing unused kernel memory: 320K  
[1.327057] usb 1-9: new low-speed USB device number 2 using xhci\_hcd  
[1.415218] systemd[1]: systemd 239 (239-51.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)  
[1.427134] systemd[1]: Detected architecture x86-64.  
[1.427135] systemd[1]: Running in initial RAM disk.  
[1.432869] systemd[1]: Set hostname to \<localhost.localdomain\>.  
[1.452216] systemd[1]: Listening on udev Control Socket.  
[1.452233] systemd[1]: Reached target Timers.  
[1.452239] systemd[1]: Reached target Swap.  
[1.452242] systemd[1]: Reached target Slices.  
[1.452262] systemd[1]: Listening on Journal Socket (/dev/log).  
[1.452275] systemd[1]: Listening on udev Kernel Socket.  
[1.459775] fuse: init (API version 7.33)  
[1.462650] usb 1-9: New USB device found, idVendor=046d, idProduct=c34b, bcdDevice=62.10  
[1.462651] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0  
[1.462652] usb 1-9: Product: USB Keyboard  
[1.462652] usb 1-9: Manufacturer: Logitech  
[1.470351] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.0/0003:046D:C34B.0001/input/input5  
[1.519836] device-mapper: uevent: version 1.0.3  
[1.519871] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: [dm-devel@redhat.com](mailto:dm-devel@redhat.com)  
[1.522093] hid-generic 0003:046D:C34B.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-9/input0  
[1.524983] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9:1.1/0003:046D:C34B.0002/input/input6  
[1.577041] hid-generic 0003:046D:C34B.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-9/input1  
[1.578980] nvme 0000:01:00.0: platform quirk: setting simple suspend  
[1.579023] nvme nvme0: pci function 0000:01:00.0  
[1.590938] e1000e: Intel(R) PRO/1000 Network Driver  
[1.590938] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.  
[1.591189] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode  
[1.591591] libata version 3.00 loaded.  
[1.593582] nvme nvme0: Shutdown timeout set to 8 seconds  
[1.594531] ahci 0000:00:17.0: version 3.0  
[1.599681] nvme nvme0: allocated 64 MiB host memory buffer.  
[1.604863] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf0 impl SATA mode  
[1.604864] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds  
[1.613307] scsi host0: ahci  
[1.613366] scsi host1: ahci  
[1.613417] scsi host2: ahci  
[1.613485] scsi host3: ahci  
[1.613539] scsi host4: ahci  
[1.613580] scsi host5: ahci  
[1.613621] scsi host6: ahci  
[1.613664] scsi host7: ahci  
[1.613681] ata1: DUMMY  
[1.613681] ata2: DUMMY  
[1.613682] ata3: DUMMY  
[1.613682] ata4: DUMMY  
[1.613688] ata5: SATA max UDMA/133 abar m2048@0x80923000 port 0x80923300 irq 126  
[1.613689] ata6: SATA max UDMA/133 abar m2048@0x80923000 port 0x80923380 irq 126  
[1.613691] ata7: SATA max UDMA/133 abar m2048@0x80923000 port 0x80923400 irq 126  
[1.613692] ata8: SATA max UDMA/133 abar m2048@0x80923000 port 0x80923480 irq 126  
[1.658215] nvme nvme0: 12/0/0 default/read/poll queues  
[1.662270] nvme0n1: detected capacity change from 0 to 256060514304  
[1.664471] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock  
[1.664541] nvme0n1: p1 p2 p3  
[1.685320] i915: unknown parameter ‘alpha\_support’ ignored  
[1.685540] i915 0000:00:02.0: Your graphics device 4690 is not properly supported by the driver in this  
kernel version. To force driver probe anyway, use i915.force\_probe=4690  
module parameter or CONFIG\_DRM\_I915\_FORCE\_PROBE=4690 configuration option,  
or (recommended) check for kernel updates.  
[1.691039] usb 1-10: new low-speed USB device number 3 using xhci\_hcd  
[1.727404] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 5c:60:ba:3f:ec:c4  
[1.727405] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection  
[1.727517] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF  
[1.728023] e1000e 0000:00:1f.6 eno1: renamed from eth0  
[1.821585] usb 1-10: New USB device found, idVendor=0461, idProduct=4141, bcdDevice= 1.00  
[1.821589] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0  
[1.821591] usb 1-10: Product: HP 320M USB Optical Mouse  
[1.821593] usb 1-10: Manufacturer: PixArt  
[1.824675] input: PixArt HP 320M USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/0003:0461:4141.0003/input/input7  
[1.824910] hid-generic 0003:0461:4141.0003: input,hidraw2: USB HID v1.11 Mouse [PixArt HP 320M USB Optical Mouse] on usb-0000:00:14.0-10/input0  
[1.927604] ata8: SATA link down (SStatus 4 SControl 300)  
[1.927821] ata7: SATA link down (SStatus 4 SControl 300)  
[1.927840] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)  
[1.927946] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)  
[1.928978] ata5.00: ATA-10: WDC WD10EZEX-60WN4A2, 04.01A04, max UDMA/100  
[1.928979] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA  
[1.929948] ata5.00: configured for UDMA/100  
[1.930112] scsi 4:0:0:0: Direct-Access ATA WDC WD10EZEX-60W 1A04 PQ: 0 ANSI: 5  
[1.935153] ata6.00: ATAPI: hp PLDS DVDRW DU8AESH, 6HSM, max UDMA/133  
[1.945858] ata6.00: configured for UDMA/133  
[1.958457] scsi 5:0:0:0: CD-ROM hp PLDS DVDRW DU8AESH 6HSM PQ: 0 ANSI: 5  
[1.982679] scsi 4:0:0:0: Attached scsi generic sg0 type 0  
[1.982690] scsi 5:0:0:0: Attached scsi generic sg1 type 5  
[1.985157] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)  
[1.985158] sd 4:0:0:0: [sda] 4096-byte physical blocks  
[1.985160] sd 4:0:0:0: [sda] Write Protect is off  
[1.985161] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00  
[1.985165] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA  
[2.019942] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray  
[2.019946] cdrom: Uniform CD-ROM driver Revision: 3.20  
[2.041972] sda: sda1  
[2.042154] sd 4:0:0:0: [sda] Attached SCSI disk  
[2.048222] sr 5:0:0:0: Attached scsi CD-ROM sr0  
[2.372077] PM: Image not found (code -22)  
[2.479713] SGI XFS with ACLs, security attributes, quota, no debug enabled  
[2.480821] XFS (dm-0): Mounting V5 Filesystem  
[2.493213] XFS (dm-0): Ending clean mount  
[2.606093] printk: systemd: 16 output lines suppressed due to ratelimiting  
[2.641191] audit: type=1404 audit(1715356656.856:2): enforcing=1 old\_enforcing=0 auid=4294967295 ses=4294967295 enabled=1 old-enabled=1 lsm=selinux res=1  
[2.696112] SELinux: policy capability network\_peer\_controls=1  
[2.696113] SELinux: policy capability open\_perms=1  
[2.696113] SELinux: policy capability extended\_socket\_class=1  
[2.696113] SELinux: policy capability always\_check\_network=0  
[2.696114] SELinux: policy capability cgroup\_seclabel=1  
[2.696114] SELinux: policy capability nnp\_nosuid\_transition=1  
[2.709399] audit: type=1403 audit(1715356656.924:3): auid=4294967295 ses=4294967295 lsm=selinux res=1  
[2.710115] systemd[1]: Successfully loaded SELinux policy in 69.119ms.  
[2.715006] systemd[1]: RTC configured in localtime, applying delta of 540 minutes to system time.  
[2.724713] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 8.295ms.  
[2.726139] systemd[1]: systemd 239 (239-51.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy)  
[2.738082] systemd[1]: Detected architecture x86-64.  
[2.738695] systemd[1]: Set hostname to \<localhost.localdomain\>.  
[2.842408] systemd[1]: systemd-journald.service: Succeeded.  
[2.842755] systemd[1]: initrd-switch-root.service: Succeeded.  
[2.842936] systemd[1]: Stopped Switch Root.  
[2.843100] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart.  
[2.843128] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.  
[2.843152] systemd[1]: Stopped Journal Service.  
[2.843484] systemd[1]: Starting Journal Service…  
[2.866031] Adding 8105980k swap on /dev/mapper/rl-swap. Priority:-2 extents:1 across:8105980k SSFS  
[4.012749] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)  
[4.012777] acpi PNP0C14:02: duplicate WMI GUID 2B814318-4BE8-4707-9D84-A190A859B5D0 (first instance was on PNP0C14:00)  
[4.012777] acpi PNP0C14:02: duplicate WMI GUID 41227C2D-80E1-423F-8B8E-87E32755A0EB (first instance was on PNP0C14:00)  
[4.012778] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)  
[4.130047] intel-lpss 0000:00:1e.0: enabling device (0000 → 0002)  
[4.140542] i801\_smbus 0000:00:1f.4: enabling device (0000 → 0003)  
[4.140726] i801\_smbus 0000:00:1f.4: SPD Write Disable is set  
[4.140764] i801\_smbus 0000:00:1f.4: SMBus using PCI interrupt  
[4.140857] idma64 idma64.0: Found Intel integrated DMA 64-bit  
[4.141010] dw-apb-uart.0: ttyS2 at MMIO 0x4017000000 (irq = 16, base\_baud = 6250000) is a 16550A  
[4.153200] intel-lpss 0000:00:1e.3: enabling device (0000 → 0002)  
[4.153440] idma64 idma64.1: Found Intel integrated DMA 64-bit  
[4.212877] snd\_hda\_intel 0000:00:1f.3: enabling device (0000 → 0002)  
[5.061086] input: PC Speaker as /devices/platform/pcspkr/input/input8  
[5.086899] perf uncore: Cannot find matched IMC device.  
[5.086903] perf uncore: Cannot find matched IMC device.  
[5.096278] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer  
[5.096278] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules  
[5.096278] RAPL PMU: hw unit of domain package 2^-14 Joules  
[5.096279] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules  
[5.096279] RAPL PMU: hw unit of domain psys 2^-14 Joules  
[5.441385] iTCO\_vendor\_support: vendor-support=0  
[5.442500] iTCO\_wdt: Intel TCO WatchDog Timer Driver v1.11  
[5.442581] iTCO\_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)  
[5.442681] iTCO\_wdt: initialized. heartbeat=30 sec (nowayout=0)  
[5.446570] hp\_wmi: query 0x4 returned error 0x5  
[5.448845] hp\_wmi: query 0x4 returned error 0x5  
[5.451004] hp\_wmi: query 0xd returned error 0x5  
[5.451030] input: HP WMI hotkeys as /devices/virtual/input/input9  
[5.453065] intel\_rapl\_common: Found RAPL domain package  
[5.453066] intel\_rapl\_common: Found RAPL domain core  
[5.453067] intel\_rapl\_common: Found RAPL domain uncore  
[5.453068] intel\_rapl\_common: Found RAPL domain psys  
[5.461141] pxa2xx-spi pxa2xx-spi.1: missing platform data  
[6.001399] XFS (dm-2): Mounting V5 Filesystem  
[6.001436] XFS (nvme0n1p2): Mounting V5 Filesystem  
[6.025921] XFS (dm-2): Ending clean mount  
[6.026950] XFS (nvme0n1p2): Ending clean mount  
[6.096808] RPC: Registered named UNIX socket transport module.  
[6.096808] RPC: Registered udp transport module.  
[6.096808] RPC: Registered tcp transport module.  
[6.096809] RPC: Registered tcp NFSv4.1 backchannel transport module.  
[6.307284] IPv6: ADDRCONF(NETDEV\_UP): eno1: link is not ready  
[6.488529] IPv6: ADDRCONF(NETDEV\_UP): eno1: link is not ready  
[6.491117] IPv6: ADDRCONF(NETDEV\_UP): eno1: link is not ready  
[6.492479] IPv6: ADDRCONF(NETDEV\_UP): eno1: link is not ready  
[10.264847] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None  
[10.264915] IPv6: ADDRCONF(NETDEV\_CHANGE): eno1: link becomes ready  
[10.383138] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br\_netfilter if you need this.  
[10.386370] tun: Universal TUN/TAP device driver, 1.6  
[10.386919] virbr0: port 1(virbr0-nic) entered blocking state  
[10.386920] virbr0: port 1(virbr0-nic) entered disabled state  
[10.386942] device virbr0-nic entered promiscuous mode  
[10.564339] virbr0: port 1(virbr0-nic) entered blocking state  
[10.564341] virbr0: port 1(virbr0-nic) entered listening state  
[10.583117] virbr0: port 1(virbr0-nic) entered disabled state  
[19.445451] rfkill: input handler disabled  
[66.528092] snd\_hda\_intel 0000:00:1f.3: couldn’t bind with audio component  
[66.547054] snd\_hda\_codec\_realtek hdaudioC0D0: autoconfig for ALC256: line\_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line  
[66.547055] snd\_hda\_codec\_realtek hdaudioC0D0: speaker\_outs=1 (0x14/0x0/0x0/0x0/0x0)  
[66.547056] snd\_hda\_codec\_realtek hdaudioC0D0: hp\_outs=1 (0x21/0x0/0x0/0x0/0x0)  
[66.547056] snd\_hda\_codec\_realtek hdaudioC0D0: mono: mono\_out=0x0  
[66.547056] snd\_hda\_codec\_realtek hdaudioC0D0: inputs:  
[66.547057] snd\_hda\_codec\_realtek hdaudioC0D0: Mic=0x19  
[66.587398] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10  
[66.587452] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11  
[66.587484] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12

This is the dmesg you requested. Please confirm.

---

<div class="post-metadata">

**Author:** ![brian](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.rockylinux.org/brian/32/5777_2.png) [@brian](https://forums.rockylinux.org/u/brian)\
**Post date:** [May 10, 2024, 8:00am UTC](https://forums.rockylinux.org/t/rocky-linux-login-freezing/13982/4 "2024-05-10T08:00:11Z")

</div>

I don’t see any indications of a problem there. Maybe try checking the systemd journal? I’d also try to see if there’s a difference between attempting to start a wayland session or an x11 session.

In your next post:  
Do not just post an entire log. Look for snippets you think are relevant. Attempt some troubleshooting steps on your own, and list what you’ve tried / what you’ve searched for. If you want people to help you, you have to show that you’re putting some effort into trying to solve it yourself, too.

---

<div class="post-metadata">

**Author:** ![beakgwangsun](https://avatars.discourse-cdn.com/v4/letter/b/f19dbf/32.png) [@beakgwangsun](https://forums.rockylinux.org/u/beakgwangsun)\
**Post date:** [May 10, 2024, 8:32am UTC](https://forums.rockylinux.org/t/rocky-linux-login-freezing/13982/5 "2024-05-10T08:32:57Z")

</div>

Okay, I’ll try to analyze the issue you’re experiencing, and I’ll be sure to post when I’m stuck or have questions. Thank you.

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex020/uploads/rockylinux/original/1X/91b7219eec10e30013422e4df76c1d898711a5d5.svg) [@system](https://forums.rockylinux.org/u/system)\
**Post date:** [July 9, 2024, 8:33am UTC](https://forums.rockylinux.org/t/rocky-linux-login-freezing/13982/6 "2024-07-09T08:33:02Z")

</div>

Closed on July 9, 2024, 8:33am UTC

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.