# RL 9 on HP Microserver gen 8

**URL:** <https://forums.rockylinux.org/t/rl-9-on-hp-microserver-gen-8/16788>\
**Category:** Rocky Linux Help & Support\
**Tags:** rocky-linux-9\
**Created:** [December 8, 2024, 7:58pm UTC](https://forums.rockylinux.org/t/rl-9-on-hp-microserver-gen-8/16788 "2024-12-08T19:58:39Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JohanS](https://avatars.discourse-cdn.com/v4/letter/j/3ab097/32.png) [@JohanS](https://forums.rockylinux.org/u/JohanS)\
**Post date:** [December 8, 2024, 7:58pm UTC](https://forums.rockylinux.org/t/rl-9-on-hp-microserver-gen-8/16788/1 "2024-12-08T19:58:39Z")

</div>

Hi,

Today thought I’d upgrade my old HP Microserver gen8. Until now it’s been running Centos7. As Centos 7 is way out of date I thought I’d give RL 9 a try. The installation itself went fine and no signs of problems. However after the reboot, the boot disk is not found and the server tries to boot from the NICs. When I boot on the install media into resuce mode things looks ok, the partitions etc are created.

Now I wonder if anyone have experienced the same and if there is a way to solve it? How can I trouble shoot this one?

---

<div class="post-metadata">

**Author:** ![system](https://us1.discourse-cdn.com/flex020/uploads/rockylinux/original/1X/91b7219eec10e30013422e4df76c1d898711a5d5.svg) [@system](https://forums.rockylinux.org/u/system)\
**Post date:** [February 6, 2025, 7:58pm UTC](https://forums.rockylinux.org/t/rl-9-on-hp-microserver-gen-8/16788/2 "2025-02-06T19:58:45Z")

</div>

This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.