# Remote deploy Rocky Linux using VNC connect **URL:** \ **Category:** Rocky Linux Help & Support\ **Created:** [April 17, 2024, 2:52pm UTC](https://forums.rockylinux.org/t/remote-deploy-rocky-linux-using-vnc-connect/13639 "2024-04-17T14:52:48Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![blueaquan](https://avatars.discourse-cdn.com/v4/letter/b/3ec8ea/32.png) [@blueaquan](https://forums.rockylinux.org/u/blueaquan)\ **Post date:** [April 17, 2024, 2:52pm UTC](https://forums.rockylinux.org/t/remote-deploy-rocky-linux-using-vnc-connect/13639/1 "2024-04-17T14:52:48Z")
Hi I am trying to install Rocky Linux 9.3 on remote machine. When I had last used CentOS, I could ask a local help to press the **Tab** key or edit the boot menu and type in the below mentioned command which allowed me to connect to the target machine remotely using VNC and continue the installation process. An example would look like this > **ip=192.168.1.100::192.168.1.1:255.255.255.0:io.jupiter.com::off inst.vnc inst.vncpassword=asdfgh** I could then connect to that IP 192.168.1.100 using a VNC viewer and would get the installation screen and continue the process. Can the same be done on Rocky Linux 9.3…? Thanks, Best BA ---
**Author:** ![jlehtone](https://avatars.discourse-cdn.com/v4/letter/j/e9a140/32.png) [@jlehtone](https://forums.rockylinux.org/u/jlehtone)\ **Post date:** [April 17, 2024, 3:02pm UTC](https://forums.rockylinux.org/t/remote-deploy-rocky-linux-using-vnc-connect/13639/2 "2024-04-17T15:02:46Z")
Should be possible, although I’d use `ip=dhcp` if possible and ask from remote hand which IP address the installer shows. You surely have a local machine where you could boot the installer and verify how the **Tab** and _type_ turns out? ---
**Author:** ![system](https://us1.discourse-cdn.com/flex020/uploads/rockylinux/original/1X/91b7219eec10e30013422e4df76c1d898711a5d5.svg) [@system](https://forums.rockylinux.org/u/system)\ **Post date:** [June 16, 2024, 3:02pm UTC](https://forums.rockylinux.org/t/remote-deploy-rocky-linux-using-vnc-connect/13639/3 "2024-06-16T15:02:57Z")
This topic was automatically closed 60 days after the last reply. New replies are no longer allowed.