# Default kernel choice ignored **URL:** \ **Category:** Rocky Linux Help & Support\ **Created:** [February 27, 2023, 3:23pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037 "2023-02-27T15:23:49Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![noamb](https://avatars.discourse-cdn.com/v4/letter/n/ecccb3/32.png) [@noamb](https://forums.rockylinux.org/u/noamb)\ **Post date:** [February 27, 2023, 3:23pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/1 "2023-02-27T15:23:49Z")
I’m going crazy trying to figure out why my Rocky 8 system is ignoring my choice of default kernel. I followed some suggestions in [Latest kernel not booted - #6 by guzzijason](https://forums.rockylinux.org/t/latest-kernel-not-booted/6214/6), tried various combinations of grub2-switch-to-blscfg, grub2-mkconfig, grubby --set-default, etc, and no matter what I do when grub comes up the selected menu item is a 4.18.0-372.16 kernel rather than the latest 4.18.0-425.13. I can manually select the one I want, but the selection doesn’t stick. The weirdest thing is that `grubby --default-kernel` reports the correct one (425.13), and grubenv (in both `/boot/grub2/` and `/boot/efi/EFI/rocky/` report the saved entry as the correct one. `/etc/default/grub` has `GRUB_DEFAULT=saved` and `GRUB_SAVEDEFAULT=true`. ---
**Author:** ![jbkt23](https://avatars.discourse-cdn.com/v4/letter/j/9fc29f/32.png) [@jbkt23](https://forums.rockylinux.org/u/jbkt23)\ **Post date:** [February 28, 2023, 6:28pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/2 "2023-02-28T18:28:04Z")
So we need to know the state of where what boot related files are on your system. Use the block quotes for the requested output from the editor menu \ In /etc we need to know where these links point to in the output of this listing: ```auto ls -l /etc | grep grub2 ``` Post your systems mount points per /etc/fstab Post the output of this command: ```auto less /etc/default/grub | grep -i blscfg ``` Then the output of this listing: ```auto ls -l /boot/loader/entries ``` Once you’ve posted the requested information it may be possible to repair the boot loader menu selection. ---
**Author:** ![noamb](https://avatars.discourse-cdn.com/v4/letter/n/ecccb3/32.png) [@noamb](https://forums.rockylinux.org/u/noamb)\ **Post date:** [February 28, 2023, 8:00pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/3 "2023-02-28T20:00:40Z")
Thanks for taking a look. ```auto $ ls -l /etc | grep grub2 lrwxrwxrwx. 1 root root 22 Feb 21 15:58 grub2.cfg -> ../boot/grub2/grub.cfg lrwxrwxrwx 1 root root 30 Feb 21 15:58 grub2-efi.cfg -> ../boot/efi/EFI/rocky/grub.cfg ``` relevant mountpoints ```auto /dev/lvm_vol_group/boot /boot ext4 defaults,nosuid,nodev 1 2 ``` ```auto $ grep -i blscfg /etc/default/grub GRUB_ENABLE_BLSCFG=true ``` ```auto $ ls -l /boot/loader/entries total 16 -rw-r--r--. 1 root root 405 Jun 22 2021 264e18c4978f4cc9b7885e5be223b563-0-rescue.conf -rw-r--r-- 1 root root 360 Aug 12 2022 264e18c4978f4cc9b7885e5be223b563-4.18.0-372.16.1.el8_6.0.1.x86_64.conf -rw-r--r-- 1 root root 340 Feb 21 14:39 264e18c4978f4cc9b7885e5be223b563-4.18.0-425.13.1.el8_7.x86_64.conf -rw-r--r-- 1 root root 325 Nov 9 15:27 264e18c4978f4cc9b7885e5be223b563-4.18.0-425.3.1.el8.x86_64.conf ``` ---
**Author:** ![jbkt23](https://avatars.discourse-cdn.com/v4/letter/j/9fc29f/32.png) [@jbkt23](https://forums.rockylinux.org/u/jbkt23)\ **Post date:** [February 28, 2023, 11:07pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/4 "2023-02-28T23:07:10Z")
So based on the output you’ve provided it appears that RH uses the old method of implementing the “BLS” or boot loader spec. That means the grub.cfg in …/EFI/Rocky/ is not a stub pointing to /boot as it is on RL9. The target of grub2\_mkconfig in this case should be /boot/efi/EFI/Rocky/grub.cfg . Since you say you are trying to specify the default kernel which just happens to be the current latest kernel, does this mean you had in the past specified a different kernel? If so, what means did you use to do that? There is one more thing that would be good to know and that is the output of this: ```auto grep -i grub_default /etc/default/grub ``` To boot the latest kernel the value of that output should = 0 ---
**Author:** ![noamb](https://avatars.discourse-cdn.com/v4/letter/n/ecccb3/32.png) [@noamb](https://forums.rockylinux.org/u/noamb)\ **Post date:** [March 1, 2023, 4:36pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/5 "2023-03-01T16:36:29Z")
I don’t recall ever specifying a specific kernel. What I’d like it to default to the latest kernel unless I specifically pick a different one at boot time, and then stick with that one. I have ```auto $ grep -i grub_default /etc/default/grub GRUB_DEFAULT=saved ``` which, as I understand, is consistent with the behavior I want. I’ve also confirmed that the output of `grub2-mkconfig` is identical to `/boot/efi/EFI/rocky/grub.cfg` ---
**Author:** ![Ritov](https://avatars.discourse-cdn.com/v4/letter/r/3ec8ea/32.png) [@Ritov](https://forums.rockylinux.org/u/Ritov)\ **Post date:** [March 1, 2023, 4:51pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/6 "2023-03-01T16:51:55Z")
Is your system booting via EFI? If so, delete `/boot/grub2/grub.cfg` and `/etc/grub.cfg`. After, configure your system again just to be sure `grub2-mkconfig > /etc/grub2-efi.cfg` ---
**Author:** ![noamb](https://avatars.discourse-cdn.com/v4/letter/n/ecccb3/32.png) [@noamb](https://forums.rockylinux.org/u/noamb)\ **Post date:** [March 1, 2023, 5:05pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/7 "2023-03-01T17:05:52Z")
I suspect it is booting by EFI, but why would having both config files be an issue, if they are identical, which they are? ---
**Author:** ![jbkt23](https://avatars.discourse-cdn.com/v4/letter/j/9fc29f/32.png) [@jbkt23](https://forums.rockylinux.org/u/jbkt23)\ **Post date:** [March 1, 2023, 6:23pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/8 "2023-03-01T18:23:53Z")
I don’t think the duplicate configs matter either. How bls configures the boot order is different than grub2. The grubby tool edits the configs under /boot/loader/entries/ so I would look at and compare the entries there to see what differences there are between them. It also may be helpful to consult the redhat documentation for RHEL 8. They may cover the saved entry conditions that you desire. So what happens when the saved entry gets rotated out of existence on a future kernel update? ---
**Author:** ![jlehtone](https://avatars.discourse-cdn.com/v4/letter/j/e9a140/32.png) [@jlehtone](https://forums.rockylinux.org/u/jlehtone)\ **Post date:** [March 1, 2023, 6:54pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/9 "2023-03-01T18:54:56Z")
> [@noamb](#): > > `GRUB_SAVEDEFAULT=true` Doesn’t that mean that the GRUB should update the grubenv on every boot to record which entry you did choose? It is not set by default. ---
**Author:** ![noamb](https://avatars.discourse-cdn.com/v4/letter/n/ecccb3/32.png) [@noamb](https://forums.rockylinux.org/u/noamb)\ **Post date:** [March 1, 2023, 7:00pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/10 "2023-03-01T19:00:11Z")
> Doesn’t that mean that the GRUB should update the grubenv on every boot to record which entry you did choose? Yes, I think it should, and the saved entry in grubenv is the correct one (i.e. the one I selected last), but it still doesn’t select that one by default next time I boot. And grubby correctly reports the kernel I want to boot with as the default. But the grub menu doesn’t actually have that one highlighted by default. ---
**Author:** ![jlehtone](https://avatars.discourse-cdn.com/v4/letter/j/e9a140/32.png) [@jlehtone](https://forums.rockylinux.org/u/jlehtone)\ **Post date:** [March 1, 2023, 8:32pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/11 "2023-03-01T20:32:56Z")
The `efibootmgr` can show the UEFI boot menu entries. Does the default entry load .efi binary from the EFI/rocky/ ? ---
**Author:** ![noamb](https://avatars.discourse-cdn.com/v4/letter/n/ecccb3/32.png) [@noamb](https://forums.rockylinux.org/u/noamb)\ **Post date:** [March 1, 2023, 9:15pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/12 "2023-03-01T21:15:17Z")
I’m not entirely sure how to parse the output, but I think yes? ```auto BootCurrent: 0000 Timeout: 1 seconds BootOrder: 0000,000B,000C,0002,0003,0004,0005,0007,0008,0009,000A,000D,0001 Boot0000* Rocky Linux . . . ``` ---
**Author:** ![jlehtone](https://avatars.discourse-cdn.com/v4/letter/j/e9a140/32.png) [@jlehtone](https://forums.rockylinux.org/u/jlehtone)\ **Post date:** [March 1, 2023, 10:21pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/13 "2023-03-01T22:21:23Z")
Since the 0000 is first in boot order and is titled “Rocky Linux”, it probably loads what we expect. The command needs the verbose option to know for sure: `-v` See [https://wiki.gentoo.org/wiki/Efibootmgr](https://wiki.gentoo.org/wiki/Efibootmgr) ---
**Author:** ![jbkt23](https://avatars.discourse-cdn.com/v4/letter/j/9fc29f/32.png) [@jbkt23](https://forums.rockylinux.org/u/jbkt23)\ **Post date:** [March 2, 2023, 1:05pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/14 "2023-03-02T13:05:05Z")
You might look at what is saved in /etc/sysconfig/kernel/ maybe there is a conflict with what is there and what is in your grubenv. Does the order of these entries matter? > [@noamb](#): > > `/etc/default/grub` has `GRUB_DEFAULT=saved` and `GRUB_SAVEDEFAULT=true`. ```auto efibootmgr -v | grep Rocky Boot0000* Rocky Linux HD(7,GPT,4d4baea3-0308-4ae4-b2c1-7ecc6f262789,0xdd01000,0x200000)/File(\EFI\ROCKY\SHIMX64.EFI) ``` This isn’t going to be conclusive as it only points to the UEFI boot loader and not to a grub.cfg file. Do note that the first 50 lines of grub.cfg deal with what kernel to boot based on the saved default. ---
**Author:** ![jlehtone](https://avatars.discourse-cdn.com/v4/letter/j/e9a140/32.png) [@jlehtone](https://forums.rockylinux.org/u/jlehtone)\ **Post date:** [March 2, 2023, 3:16pm UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/15 "2023-03-02T15:16:13Z")
> [@jbkt23](#): > > This isn’t going to be conclusive as it only points to the UEFI boot loader and not to a grub.cfg file. That is true. The bootloader can and does seek config with many names&paths. I’ve seen that in the logs of tftp server after PXE-boot. ---
**Author:** ![jbkt23](https://avatars.discourse-cdn.com/v4/letter/j/9fc29f/32.png) [@jbkt23](https://forums.rockylinux.org/u/jbkt23)\ **Post date:** [March 3, 2023, 12:26am UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/16 "2023-03-03T00:26:31Z")
So I read the documentation for RH9 in regards to setting a kernel other than the latest as default and it only covered one time reboots. Useless in the OP’s desired setup. The thing is that with BLS grub2 is not truly controlling the boot. The OP’s desire is an edge case, but valid if you have hardware that doesn’t work with a particular kernel. Oh I should note that the OP is using RH8 but the documentation is probably just as sparse. So the only real help that will be useful is for someone who has actually mastered this on their own replying to this thread with their knowledge. ---
**Author:** ![brian](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.rockylinux.org/brian/32/5777_2.png) [@brian](https://forums.rockylinux.org/u/brian)\ **Post date:** [August 25, 2023, 3:23am UTC](https://forums.rockylinux.org/t/default-kernel-choice-ignored/9037/17 "2023-08-25T03:23:09Z")