# Cannot install package libgomp-8.5.0-4.el8\_5.x86\_64

**URL:** <https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567>\
**Category:** Rocky Linux Help & Support\
**Created:** [November 16, 2021, 5:07am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567 "2021-11-16T05:07:34Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![athensy](https://avatars.discourse-cdn.com/v4/letter/a/7ba0ec/32.png) [@athensy](https://forums.rockylinux.org/u/athensy)\
**Post date:** [November 16, 2021, 5:07am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/1 "2021-11-16T05:07:34Z")

</div>

After upgrade Rocky Linux from 8.4 to 8.5, I get the following error as I try to update my system:

Last metadata expiration check: 0:42:23 ago on Tue 16 Nov 2021 12:41:31 HKT.  
Error:  
Problem 1: package libstdc+±devel-8.5.0-3.el8.x86\_64 requires libstdc++(x86-64) = 8.5.0-3.el8, but none of the providers can be installed

- cannot install both libstdc+±8.5.0-4.el8\_5.x86\_64 and libstdc+±8.5.0-3.el8.x86\_64
- cannot install the best update candidate for package libstdc+±devel-8.5.0-3.el8.x86\_64
- cannot install the best update candidate for package libstdc+±8.5.0-3.el8.x86\_64  
Problem 2: libgomp-8.5.0-3.el8.i686 has inferior architecture
- package gcc-8.5.0-3.el8.x86\_64 requires libgomp = 8.5.0-3.el8, but none of the providers can be installed
- cannot install both libgomp-8.5.0-4.el8\_5.x86\_64 and libgomp-8.5.0-3.el8.x86\_64
- cannot install the best update candidate for package libgomp-8.5.0-3.el8.x86\_64
- cannot install the best update candidate for package gcc-8.5.0-3.el8.x86\_64  
(try to add ‘–allowerasing’ to command line to replace conflicting packages or ‘–skip-broken’ to skip uninstallable packages or ‘–nobest’ to use not only best candidate packages)

Then I issue command “dnf update --allowerasing --nobest”, I get the follow error:

Problem: cannot install the best update candidate for package gcc-8.5.0-3.el8.x86\_64

- problem with installed package gcc-8.5.0-3.el8.x86\_64
- package gcc-8.5.0-3.el8.x86\_64 requires libgomp.so.1()(64bit), but none of the providers can be installed
- cannot install the best update candidate for package libgomp-8.5.0-3.el8.x86\_64
- libgomp-8.5.0-3.el8.i686 has inferior architecture
- package gcc-8.5.0-3.el8.x86\_64 requires libgomp = 8.5.0-3.el8, but none of the providers can be installed
- cannot install both libgomp-8.5.0-4.el8\_5.x86\_64 and libgomp-8.5.0-3.el8.x86\_64  
==========================================================================================================================================================================================  
Package Architecture Version Repository Size  
==========================================================================================================================================================================================  
Skipping packages with conflicts:  
(add ‘–best’ to command line to force their upgrade):  
libgomp x86\_64 8.5.0-4.el8\_5 baseos 205 k

# Transaction Summary

Skip 1 Package

Nothing to do.  
Complete!

I can’t fix it by trying all suggested options in the error message, please help.

---

<div class="post-metadata">

**Author:** ![label](https://avatars.discourse-cdn.com/v4/letter/l/c5a1d2/32.png) [@label](https://forums.rockylinux.org/u/label)\
**Post date:** [November 16, 2021, 5:37am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/2 "2021-11-16T05:37:39Z")

</div>

Are you excluding packages in your dnf/repo configuration? Are you selectively running updates rather than just running `dnf update`? If at all possible, please provide `rpaste --sysinfo`.

---

<div class="post-metadata">

**Author:** ![linuxlover](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.rockylinux.org/linuxlover/32/2227_2.png) [@linuxlover](https://forums.rockylinux.org/u/linuxlover)\
**Post date:** [November 16, 2021, 5:51am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/3 "2021-11-16T05:51:16Z")

</div>

Dear nazunalika  
As per my understandig below two package are missing in appstream which are causing update the issue.

libstdc+±devel-8.5.0- **4**.el8.x86\_64 and gcc-8.5.0- **4**.el8.x86\_64

Their available version are gcc-8.5.0-3.el8.x86\_64 and libstdc+±devel-8.5.0-3.el8.x86\_64

---

<div class="post-metadata">

**Author:** ![linuxlover](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.rockylinux.org/linuxlover/32/2227_2.png) [@linuxlover](https://forums.rockylinux.org/u/linuxlover)\
**Post date:** [November 16, 2021, 6:39am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/4 "2021-11-16T06:39:58Z")

</div>

Further more i tested AlmaLinux and did not observe this error. Then tried to compare it with AlmaLinux

 ![image](https://us1.discourse-cdn.com/flex020/uploads/rockylinux/original/2X/d/d7db8b2bcbe2753f2e26a88ccab279b6e9283a12.png)

and

 ![image](https://us1.discourse-cdn.com/flex020/uploads/rockylinux/original/2X/8/83eee5fed0a26289ce0bc3f9de198a9f7d88bb40.png)

Alama is not providing libstdc+±8.5.0-4.el8.x86\_64 and libgomp-8.5.0-4.el8.x86\_64 whose update is causing the issue.

---

<div class="post-metadata">

**Author:** ![athensy](https://avatars.discourse-cdn.com/v4/letter/a/7ba0ec/32.png) [@athensy](https://forums.rockylinux.org/u/athensy)\
**Post date:** [November 16, 2021, 11:02am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/5 "2021-11-16T11:02:11Z")

</div>

Hi nazunalika,

rpaste --sysinfo details are as follows:

# OS Release:

Rocky Linux release 8.5 (Green Obsidian)  
NAME=“Rocky Linux”  
VERSION=“8.5 (Green Obsidian)”  
ID=“rocky”  
ID\_LIKE=“rhel centos fedora”  
VERSION\_ID=“8.5”  
PLATFORM\_ID=“platform:el8”  
PRETTY\_NAME=“Rocky Linux 8.5 (Green Obsidian)”  
ANSI\_COLOR=“0;32”  
CPE\_NAME=“cpe:/o:rocky:rocky:8.5:GA”  
HOME\_URL=“[https://rockylinux.org/](https://rockylinux.org/)”  
BUG\_REPORT\_URL=“[https://bugs.rockylinux.org/](https://bugs.rockylinux.org/)”  
ROCKY\_SUPPORT\_PRODUCT=“Rocky Linux”  
ROCKY\_SUPPORT\_PRODUCT\_VERSION=“8”  
Rocky Linux release 8.5 (Green Obsidian)

# Desktop Environments

# Desktop Installed

# SELinux Status

Disabled

SELINUX=disabled  
SELINUXTYPE=targeted

# SELinux Errors

# CPU Info

2 Intel(R) Core™ i7-4790 CPU @ 3.60GHz

# 64-bit Support

Yes

# Virtualization Support

No

# Load Average

18:59:28 up 6:34, 1 user, load average: 0.05, 0.11, 0.14

# Memory usage

```
          total used free shared buff/cache available

```

Mem: 3736 829 1896 8 1010 2731  
Swap: 3815 0 3815

# Top 5 CPU hogs

```
   0 21013 4.0 0.0 222648 2104 pts/0 S+ 18:59 0:00 rpaste
   0 20950 2.6 0.1 237236 5300 pts/0 S 18:58 0:02 bash
  27 1014 1.4 4.0 1758412 156760 ? Ssl 12:25 5:39 mysqld
   0 935 1.0 0.0 246712 3604 ? Ss 12:25 4:01 crond
   0 3334 0.1 1.2 880140 48600 ? Ssl 12:25 0:24 node /www/locat

```

# Top 5 memory hogs

```
  27 1014 1.4 4.0 1758412 156760 ? Ssl 12:25 5:39 mysqld
   0 9516 0.0 3.9 1122456 150664 ? Ssl 13:21 0:07 packagekitd
   0 3331 0.1 1.9 908856 75624 ? Ssl 12:25 0:36 node /www/locat
   0 3322 0.1 1.9 910912 73564 ? Ssl 12:25 0:43 node /www/locat
   0 3314 0.1 1.9 910188 73048 ? Ssl 12:25 0:43 node /www/locat

```

# Disk space usage

Filesystem Type Size Used Avail Use% Mounted on  
devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev  
tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm  
tmpfs tmpfs 1.9G 8.9M 1.9G 1% /run  
tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup  
/dev/mapper/rl-root xfs 89G 6.0G 83G 7% /  
/dev/loop2 squashfs 43M 43M 0 100% /var/lib/snapd/snap/certbot/1514  
/dev/loop3 squashfs 100M 100M 0 100% /var/lib/snapd/snap/core/11993  
/dev/loop0 squashfs 43M 43M 0 100% /var/lib/snapd/snap/certbot/1582  
/dev/loop5 squashfs 62M 62M 0 100% /var/lib/snapd/snap/core20/1081  
/dev/loop4 squashfs 62M 62M 0 100% /var/lib/snapd/snap/core20/1169  
/dev/loop1 squashfs 100M 100M 0 100% /var/lib/snapd/snap/core/11798  
/dev/sda1 xfs 947M 328M 620M 35% /boot  
tmpfs tmpfs 374M 0 374M 0% /run/user/1000

# Block Devices

/dev/mapper/rl-root: UUID=“899f321e-1e9a-44fb-b87c-b778edabbdf4” BLOCK\_SIZE=“512” TYPE=“xfs”  
/dev/sda2: UUID=“oia0VM-J40P-des8-2DWc-3bUx-ujaN-7T0bBo” TYPE=“LVM2\_member” PARTUUID=“361954ec-02”  
/dev/sda1: UUID=“e0119eff-d01f-4743-ba3c-457cdfc5b2c0” BLOCK\_SIZE=“512” TYPE=“xfs” PARTUUID=“361954ec-01”  
/dev/mapper/rl-swap: UUID=“bcbeb0f2-cbbb-440d-a2dd-7e2e0ca76d9c” TYPE=“swap”  
/dev/loop0: TYPE=“squashfs”  
/dev/loop1: TYPE=“squashfs”  
/dev/loop2: TYPE=“squashfs”  
/dev/loop3: TYPE=“squashfs”  
/dev/loop4: TYPE=“squashfs”  
/dev/loop5: TYPE=“squashfs”

# PCI devices

00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)  
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]  
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)  
00:02.0 VGA compatible controller [0300]: VMware SVGA II Adapter [15ad:0405]  
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)  
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]  
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC’97 Audio Controller [8086:2415] (rev 01)  
00:06.0 USB controller [0c03]: Apple Inc. KeyLargo/Intrepid USB [106b:003f]  
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)  
00:0b.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c]  
00:0d.0 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 02)

# USB devices

# DRM Information

[drm] FIFO at 0x00000000f1000000 size is 2048 kiB  
[drm] VRAM at 0x00000000f0000000 size is 16384 kiB  
[drm] DMA map mode: Caching DMA mappings.  
[drm] Capabilities:  
[drm] Cursor.  
[drm] Cursor bypass 2.  
[drm] Alpha cursor.  
[drm] 3D.  
[drm] Extended Fifo.  
[drm] Pitchlock.  
[drm] Irq mask.  
[drm] GMR.  
[drm] Traces.  
[drm] GMR2.  
[drm] Screen Object 2.  
[drm] Max GMR ids is 8192  
[drm] Max number of GMR pages is 1048576  
[drm] Max dedicated hypervisor surface memory is 507904 kiB  
[drm] Maximum display memory size is 16384 kiB  
[drm] Screen Objects Display Unit initialized  
[drm] width 720  
[drm] height 400  
[drm] bpp 32  
[drm] Fifo max 0x00200000 min 0x00001000 cap 0x00000311  
[drm] Atomic: yes.  
[drm:vmw\_host\_log [vmwgfx]] _ERROR_ Failed to send host log message.  
[drm:vmw\_host\_log [vmwgfx]] _ERROR_ Failed to send host log message.  
fbcon: svgadrmfb (fb0) is primary device  
[drm] Initialized vmwgfx 2.18.0 20200114 for 0000:00:02.0 on minor 0

# Xorg modules

# GL Support

# Xorg errors

# Kernel Buffer Tail

[8.637672] loop4: detected capacity change from 0 to 64835584  
[8.709227] squashfs: version 4.0 (2009/01/31) Phillip Lougher  
[9.042246] snd\_intel8x0 0000:00:05.0: allow list rate for 1028:0177 is 48000  
[9.044675] loop5: detected capacity change from 0 to 64770048  
[9.110976] XFS (sda1): Ending clean mount  
[16.823793] IPv6: ADDRCONF(NETDEV\_UP): enp0s3: link is not ready  
[16.825733] IPv6: ADDRCONF(NETDEV\_UP): enp0s3: link is not ready  
[16.827110] e1000: enp0s3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX  
[16.827744] IPv6: ADDRCONF(NETDEV\_CHANGE): enp0s3: link becomes ready  
[12851.724150] loop6: detected capacity change from 0 to 4096

# Last few reboots

runlevel (to lvl 3) 4.18.0-348.el8.0 Tue Nov 16 12:25 still running  
reboot system boot 4.18.0-348.el8.0 Tue Nov 16 12:24 still running  
runlevel (to lvl 3) 4.18.0-305.25.1. Fri Nov 12 17:33 - 12:24 (3+18:51)  
reboot system boot 4.18.0-305.25.1. Fri Nov 12 17:33 - 12:24 (3+18:51)  
runlevel (to lvl 3) 4.18.0-305.25.1. Fri Nov 12 08:35 - 17:17 (08:41)  
reboot system boot 4.18.0-305.25.1. Fri Nov 12 08:35 - 17:17 (08:42)  
runlevel (to lvl 3) 4.18.0-305.25.1. Mon Nov 8 21:56 - 08:33 (3+10:36)  
reboot system boot 4.18.0-305.25.1. Mon Nov 8 21:56 - 08:33 (3+10:36)  
runlevel (to lvl 3) 4.18.0-305.19.1. Tue Oct 19 01:03 - 21:56 (20+20:52)  
reboot system boot 4.18.0-305.19.1. Tue Oct 19 01:03 - 21:56 (20+20:52)

wtmp begins Wed Jun 23 22:32:12 2021

# DNF Repos

repo id repo name  
appstream Rocky Linux 8 - AppStream  
baseos Rocky Linux 8 - BaseOS  
epel Extra Packages for Enterprise Linux 8 - x86\_64  
epel-modular Extra Packages for Enterprise Linux Modular 8 - x86\_64  
extras Rocky Linux 8 - Extras  
total 72  
-rw-r–r-- 1 root root 1485 Sep 5 01:28 epel-modular.repo  
-rw-r–r-- 1 root root 1564 Sep 5 01:28 epel-playground.repo  
-rw-r–r-- 1 root root 1422 Sep 5 01:28 epel.repo  
-rw-r–r-- 1 root root 1584 Sep 5 01:28 epel-testing-modular.repo  
-rw-r–r-- 1 root root 1521 Sep 5 01:28 epel-testing.repo  
-rw-r–r–. 1 root root 700 Oct 9 07:29 Rocky-AppStream.repo  
-rw-r–r–. 1 root root 685 Oct 9 07:29 Rocky-BaseOS.repo  
-rw-r–r-- 1 root root 1753 Oct 9 07:29 Rocky-Debuginfo.repo  
-rw-r–r–. 1 root root 350 Oct 9 07:29 Rocky-Devel.repo  
-rw-r–r–. 1 root root 685 Oct 9 07:29 Rocky-Extras.repo  
-rw-r–r–. 1 root root 721 Oct 9 07:29 Rocky-HighAvailability.repo  
-rw-r–r–. 1 root root 680 Oct 9 07:29 Rocky-Media.repo  
-rw-r–r-- 1 root root 670 Oct 9 07:29 Rocky-NFV.repo  
-rw-r–r-- 1 root root 680 Oct 9 07:29 Rocky-Plus.repo  
-rw-r–r–. 1 root root 705 Oct 9 07:29 Rocky-PowerTools.repo  
-rw-r–r–. 1 root root 736 Oct 9 07:29 Rocky-ResilientStorage.repo  
-rw-r–r–. 1 root root 671 Oct 9 07:29 Rocky-RT.repo  
-rw-r–r–. 1 root root 2335 Oct 9 07:29 Rocky-Sources.repo  
[main]  
gpgcheck=1  
installonly\_limit=3  
clean\_requirements\_on\_remove=True  
best=True  
skip\_if\_unavailable=False

# Last 20 packages

rpaste-0.1-3.el8.2.noarch Tuesday, November 16, 2021 PM06:59:23 HKT  
vim-filesystem-8.0.1763-16.el8.noarch Tuesday, November 16, 2021 PM12:16:27 HKT  
qt5-srpm-macros-5.15.2-1.el8.0.1.noarch Tuesday, November 16, 2021 PM12:16:27 HKT  
NetworkManager-config-server-1.32.10-4.el8.noarch Tuesday, November 16, 2021 PM12:16:27 HKT  
alsa-sof-firmware-1.8-1.el8.noarch Tuesday, November 16, 2021 PM12:16:27 HKT  
iwl100-firmware-39.31.5.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:26 HKT  
iwl1000-firmware-39.31.5.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:26 HKT  
iwl6000g2a-firmware-18.168.6.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:25 HKT  
iwl6000-firmware-9.221.4.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:25 HKT  
iwl5150-firmware-8.24.2.2-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:25 HKT  
iwl5000-firmware-8.83.5.1\_1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:25 HKT  
iwl3160-firmware-25.30.13.0-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:25 HKT  
iwl2030-firmware-18.168.6.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:25 HKT  
iwl2000-firmware-18.168.6.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:25 HKT  
iwl135-firmware-18.168.6.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:25 HKT  
iwl105-firmware-18.168.6.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:25 HKT  
iwl7260-firmware-25.30.13.0-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:24 HKT  
iwl6050-firmware-41.28.5.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:24 HKT  
iwl6000g2b-firmware-18.168.6.1-103.el8.1.noarch Tuesday, November 16, 2021 PM12:16:24 HKT  
vim-minimal-8.0.1763-16.el8.x86\_64 Tuesday, November 16, 2021 PM12:16:21 HKT

# EFI Support

---

<div class="post-metadata">

**Author:** ![athensy](https://avatars.discourse-cdn.com/v4/letter/a/7ba0ec/32.png) [@athensy](https://forums.rockylinux.org/u/athensy)\
**Post date:** [November 16, 2021, 11:06am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/6 "2021-11-16T11:06:52Z")

</div>

Hi linuxlover,

Then you mean these packages missing in Rocky Linux cause this problem? If it is the case, do you mean it will be fixed automatically once these two packages are available?

---

<div class="post-metadata">

**Author:** ![iwalker](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.rockylinux.org/iwalker/32/2599_2.png) [@iwalker](https://forums.rockylinux.org/u/iwalker)\
**Post date:** [November 16, 2021, 11:10am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/7 "2021-11-16T11:10:46Z")

</div>

Similar as here, I think package name is problem here: [Rocky Linux 8.4 to Rocky Linux 8.5 update issues - #4 by iwalker](https://forums.rockylinux.org/t/rocky-linux-8-4-to-rocky-linux-8-5-update-issues/4565/4) it should be el8 and not el8\_5.

---

<div class="post-metadata">

**Author:** ![kthomsen](https://avatars.discourse-cdn.com/v4/letter/k/e495f1/32.png) [@kthomsen](https://forums.rockylinux.org/u/kthomsen)\
**Post date:** [November 16, 2021, 11:27am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/8 "2021-11-16T11:27:07Z")

</div>

We’ve observed that [mirrors.rockylinux.org](http://mirrors.rockylinux.org) currently serves mirrorlists for “AppStream” where each URL points to the “kickstart” tree instead of the “os” tree. For example:

```auto
$ curl 'https://mirrors.rockylinux.org/mirrorlist?arch=x86_64&repo=AppStream-8' 2>/dev/null | head -n 5
# repo = rocky-AppStream-8.5 arch = x86_64 country = global 
http://la.mirrors.clouvider.net/rocky/8.5/AppStream/x86_64/kickstart/
http://dl.rockylinux.org/pub/rocky/8.5/AppStream/x86_64/kickstart/
http://mirror.i3d.net/pub/rockylinux//8.5/AppStream/x86_64/kickstart/
https://mirror.yandex.ru/rockylinux/8.5/AppStream/x86_64/kickstart/

```

The problem w.r.t. the missing `libstdc++-devel-8.5.0-4.el8_5` update package most likely stems from this.

---

<div class="post-metadata">

**Author:** ![Martin](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.rockylinux.org/martin/32/1389_2.png) [@Martin](https://forums.rockylinux.org/u/Martin)\
**Post date:** [November 16, 2021, 1:14pm UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/9 "2021-11-16T13:14:53Z")

</div>

[This](https://forums.rockylinux.org/t/rocky-linux-8-4-to-rocky-linux-8-5-update-issues/4565/9) should help. 🙂

---

<div class="post-metadata">

**Author:** ![label](https://avatars.discourse-cdn.com/v4/letter/l/c5a1d2/32.png) [@label](https://forums.rockylinux.org/u/label)\
**Post date:** [November 16, 2021, 3:06pm UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/10 "2021-11-16T15:06:46Z")

</div>

In majority of cases, I would never suggest `allowerasigin` or `nobest` - Our mirror manager for some reason decided it wanted to choose the kickstart directory rather than os, which is where all the updated packages live. BaseOS seems fine, but it seems the other core repositories aren’t, we’ll look into it and updates should be able to go through.

---

<div class="post-metadata">

**Author:** ![brian](https://sea2.discourse-cdn.com/flex020/user_avatar/forums.rockylinux.org/brian/32/5777_2.png) [@brian](https://forums.rockylinux.org/u/brian)\
**Post date:** [August 25, 2023, 4:01am UTC](https://forums.rockylinux.org/t/cannot-install-package-libgomp-8-5-0-4-el8-5-x86-64/4567/11 "2023-08-25T04:01:33Z")

</div>


